The front window glass is made of explosion-proof tempered and tempered glass with clear optical clarity, cleaning and disinfection. The filter efficiency of the thickness of ≥5mm filter for 0.3um particles exceeds 99.999%, which satisfies the temperature under normal use conditions. , humidity, corrosion resistance and mechanical strength requirements; filter media is ultra-fine fiberglass, which may release substances that do not adversely affect people, the environment and equipment. The structure of the sliding front window can ensure that the suspension system will not fall off and thus bring danger to the operator. When the front window opening height of the secondary biosafety cabinet exceeds the specified height, the automatic sound and light alarm will make the work work. The specified front window operation port height is carried out to ensure the safety of the experiment. The R10 three-sided seamless rounded structure is used in the bare working area of ​​the safety cabinet to increase the self-cleaning function. The unique design of the bracket makes the bottom of the safety cabinet have a certain space from the ground, which is conducive to cleaning.
The new appearance is more beautiful, the front glass doors and windows have a 10 degree physiological inclination, the viewing angle is larger, and the humanity is more humanized. The inside of the working chamber has a seamless rounded structure, leaving no dead ends and easier to clean. The close-range operation is very inconvenient for the user. The bio-safety cabinet is equipped with a special remote control. The remote control has a small thickness of 7 mm and a weight of only 18 grams. The user can carry it with him or her. Direct contact between the user and the safety cabinet is avoided. Prevent cross-infection. The remote control adopts the Japanese NEC remote control special chip, which has the characteristics of good anti-interference performance, long remote control distance and high control precision. The biosafety cabinet must be sterilized by closing the glass door and window for more than 30 minutes before use, and the staff must wait 30 minutes every day to work. Based on the above considerations, the safety cabinet has added a special appointment function, before the day before work, Set the boot time and boot function, set the time range from 0 to 99 hours. Before the arrival of the staff, the safety cabinet has been fully automated to complete the preset function, in line with the working conditions, greatly improving the work efficiency of the staff.
It has sufficient steel, simple design, no exposed thread, easy to clean, and can adjust the level and stability of the safety cabinet. It has thermal protection and can work stably at 1.15 times rated voltage. It can be speed regulated and stable, and the speed controller is installed behind the removable or lockable control panel. The sump capacity is ≥4000ml, which is used to collect the splashing liquid in the working area. There is no obvious leakage and penetration within 1 hour, and a drain valve is arranged under the sump to facilitate cleaning. Keep the pressure in the safety cabinet at 500Pa±10%, and all the welding, gasket, penetration and sealing of the outer surface of the plenum should be free of soap bubbles under this pressure condition. After the center of the work surface of the safety cabinet is loaded with 23kg pressure, the work surface does not produce permanent deformation. Spray with a sprayer for one minute, the socket can work with instruments below 800W.
Shanghai Sujing Industrial Co., Ltd.
If you have any needs, you can always pass with me, thank you very much for your support to Sujing, look forward to working with you.
have a pleasant workday!
Thank you & Best regard !
SUJING—JINGHUA
Lab Water Distiller,Laboratory Distiller,Laboratory Water Distiller,Laboratory Water Distillation Equipment
ZHEJIANG FOMOS MEDICAL TECHNOLOGY CO.,LTD. , https://www.ifomos.com