Adjusting the plant pods needs a support to support them. This is an agronomic technique in which pods use natural light to make nutrients and increase yield. When the cranberry climbs over the scaffold, the method of removing the top can be used to promote the germination and growth of the lateral branch. To reduce the use of nitrogen fertilizers for plants that are prone to growing, spray plant regulators such as chlormequat. Remove the old leaves, diseased leaves or leaves from the lower part in time to ensure the ventilation and light transmission of the scaffold.
The roots of the water and fertilizer management beans are weak, drought-tolerant and resistant to drought, and the soil should be kept dry and wet. The pod stage is also a time when the pod beans are very sensitive to water and fertilizer. If the supply of fertilizer and water is not sufficient, it is difficult to guarantee its yield and quality. For this reason, when the pods are at the end of the flowering period, the management of the water and fertilizers should be strengthened as they enter the pod stage. On the basis of sufficient application of base fertilizer, combined with watering, topdressing 15 kg of nitrogen and potassium fertilizers, or 10 kg of urea, 5 kg of potassium sulfate, and stirring evenly. After entering the end of the harvest period, fertilizer should be applied once every 10 days. Watering is mainly in pouring small water, and it is performed in the evening or early morning.
Disease prevention and pest control In production, the common diseases of common bean pods are virus disease and rust disease. Continuous high temperature and drought are prone to viral diseases. Use 300 times the amount of virus A or 500 times of phytosanitary spirit spray. In the high temperature and humidity environment susceptible to rust, the use of triadimefon spray control. Common pests mainly include aphids, red spider mites, and soybean pods. 10% imidacloprid can be used to control locusts and 10 g of water can be sprayed and treated on the land per acre. The spider mites are used to control red spiders, and the backs of the blades are sprayed with focus during operation. Use 1000-fold high efficacy cypermethrin to control soybean meal. Spray once every 7-10 days, continuous medication 2 or 3 times.
After spraying leaf fertilizers into June, outside natural temperatures tend to occur at temperatures above 30°C, and the sunlight is sufficient. High temperature and strong light will adversely affect the pods that are in the scab stage. In production, there are often phenomena such as falling flowers, premature death, and premature aging. By spraying foliar fertilizer can effectively solve the above phenomenon, significantly increase the yield of the bean. The use of boron fertilizer and potassium dihydrogen phosphate mixed evenly spray, 30 kg of liquid per acre, spraying once every 10 days.
Timely harvest beans are generally harvested for about 10 days after flowering ends. The harvest time is usually in the early morning or early evening, when the temperature is low, do not touch the buds during picking, and sprain the bean shank to prevent impact on the post-production. The neat code for the picked beans is placed in a bamboo basket and the quilts are moistened and kept fresh, and they are sold to farmers' markets or bazaars in time.
End milling cutter For CNC Key cutting Machine aftermarket
key milling cutters for CNC key making machine
Product Features
1.Material: Top quality, high hardness and high wear-resistant carbide, ultra-fine particles, good wear resistance;
2. Manufacturering process: 5-axis automatic grinding center for mirror grinding, sharp edge, low noise; side fixed plane adopts full grinding process, compact installation.
3.Quality: The roundness of the handle is 0.002mm, which greatly reduces the blade yaw during high-speed rotation.
4. Features: accurate size, cutting edge size accuracy of 0.005mm, cutting key size precision; sharp edge
5.Advantages: Specially tested in 994 machine, sharp, can cut brass key and nickel silver key, test Honda original keys, STRATTEC key blanks, smooth edge, no burr, continue to use after processing 200 keys;
6. The Electronic key machine carbide tracer point has good conductivity, ensuring accurate detection, and will not damage the accuracy of the fixture and the spindle.
Suit for processing keys:All inner milling slots and outer milling slot keys, suitable for processing nickel silver keys, which can efficiently process original and high-hardness key blanks, such as Honda original keys, STRATTEC key blanks, etc.
Xhorse 1.0mm Tracer Probe For Condor Xc Mini Xc 007 Key Cutting Machine,Xhorse Condor XC-002 Replacement 1.5mm Cutter XC0202EN,Xhorse Condor XC-002 Replacement 2.5mm Cutter XC0204EN
ZHANGJIAGANG KEYCUT CO.,LTD , https://www.keycutblade.com