First, control the moisture of silage materials. When silage material has a moisture content of 65% to 70%, silage is most ideal for most silage crops. For this reason, silage crops should be harvested within a reasonable period of time (ie, the whole plant with spiked green corn should have 3 to 4 leaves in the lower part of the whole tree to become brown; when silage is pure corn silage, more than half of the corn stalk should have green leaves ); If the raw material moisture content is too much, can be properly aired and then stored or properly mixed with coarse crushed, crushed hay, etc.; if the raw material moisture content is too small, can be appropriate and uniform water or appropriate incorporation of green juicy feed. Hold the raw material tightly by hand. It is advisable to sew the water from the fingers without dropping it.
Second, silage raw materials contain a certain amount of sugar. When the raw material contains less sugar and more protein (such as peanut meal, soybean straw, alfalfa grass, etc.), it is not suitable for silage alone, and it may be better to mix the silage with a raw material containing many sugars.
Third, rapid cellaring and capping. Once the feed silage begins, it is necessary to focus on human and material resources, fast cellaring and capping, and to keep the cellar uniform, pay attention to compaction, seal the top tightly, and prevent leakage and air permeability.
Handicap Shower Chair,Teak Shower Stool,Folding Shower Seat,Medical Shower Chair
Active Life Healthcare Co.,Ltd , https://www.alh-med.com