Jun 20, 2016
The volume of the esco carbon dioxide incubator is also a factor that cannot be ignored. It is not enough to buy small, and it is wasteful and takes up space. The optional volume of the CO2 incubator is very wide and each type has a different volume. At this point, you need to have a more accurate understanding of the range of required incubator volume before purchase, and reserve a little space on this basis to ensure that it is needed. In addition, each user wants the instrument to be easy to use, and the use of the micro-processing control system and various other functional accessories makes the operation and control of the esco CO2 incubator very simple. Although the names of different microprocessor systems are different, the principle and control effect are not different. You don't have to care too much about the difference between their names when purchasing. The key is to make it easy to use and easy to operate.
Maintaining a constant temperature in the esco carbon dioxide incubator is an important factor in maintaining healthy cell growth. When purchasing a CO2 incubator, there are two types of heating structures to choose from: air jacketed heating and water jacketed heating. Although both heating systems are accurate and reliable, they all have their own advantages and disadvantages. The water jacketed incubator maintains a constant temperature by enclosing the internal tank through a separate hot water compartment. The hot water circulates through the natural convection in the tank, and the heat is transferred to the interior of the esco carbon dioxide incubator tank to maintain a constant temperature. The unique water jacket design has its advantages: water is a good thermal insulation material, and when it is powered off, the water jacket system can more reliably maintain the temperature accuracy and stability in the incubator for a long time ( The time to maintain a constant temperature is 4-5 times that of a gas-tight system).
The CO2 used in the esco carbon dioxide incubator can use liquid CO2 or gas, no matter which kind of CO2 is supplied, the pipe can not be too curved to ensure the smooth flow of gas. Generally, the CO2 cylinder is used, and the pressure control table can be connected. Zeroing of CO2 content After the temperature and humidity in the tank are stable (usually three days), turn the CO2 adjustment knob to adjust the number of the display panel to 0.00. After 5 minutes, repeat the adjustment until necessary. The reading is stable. Turn on the CO2 injection switch (injection light is on), adjust the CO2 setting to the desired concentration, and the esco carbon dioxide incubator will bring the concentration to the set concentration (the injection lamp is extinguished) and maintain it for at least 10 minutes. Thereafter, the CO2 content in the tank is automatically adjusted by the CO2 controller.
The humidity in the esco carbon dioxide incubator is a very important but often overlooked factor for training work. Maintaining sufficient humidity levels and having a fast enough humidity recovery rate (such as after opening and closing the door) will ensure that the culture fails without excessive drying. At present, most of the carbon dioxide incubators generate moisture through the evaporation of the humidifying tray. We recommend that users choose the incubator with faster humidity recovery when purchasing the esco carbon dioxide incubator.
Shanghai J.Shine Co.,Ltd , https://www.jshinechem.com