What should I do if the filling machine is not allowed to discharge?

Solution for liquid filling machine out of order:

1. The speed throttle valve and the filling interval throttle valve are closed, and the throttle valve cannot be closed.

2. Is there any foreign matter in the quick-installing three-way control valve? If so, please arrange it. There is air in the leather tube of the three-way control valve and the filling head. If there is air, try to cut or sweep the air.

3. Check if all seals are damaged. If it is damaged, please replace it with new ones.

4. Whether the filling valve plug has a stuck appearance or delayed opening. If there is a jam, the valve core should be installed from the head. If the delay is open, the thin cylinder throttle valve needs to be conditioned.

5. The elastic force of the spiral spring is tightened up and down in the three-way control valve. If the elastic force is too large, the check valve will not open.

6. Is the filling speed too fast, adjust the filling speed throttle valve, and lower the filling speed.

7, the clamp, leather tube buckle can be sealed, if any, please correct.

8. The magnetic switch is not loose. Please lock it after each adjustment.

Only by thoroughly grasping the various situations that may occur in the liquid filling machine can the liquid filling machine work better.