First, maintenance standards. Tractor maintenance standards: eliminate three leakage, that is, do not leak oil, no water leakage, no leakage, all parts of the oil seals and water seals good, joint fastening. Reached four net: the net oil, water, air, net equipment. To achieve five good: that is adjusted well, the Department of the gap, pressure, normal travel; lubrication is good, all departments require oil surface meet the requirements, the oil flow, butter injection enough; well-tightened, each part of the thread connection torque to meet regulations, to prevent too loose or Over-tightening; instrumentation is good, readings are normal; circuit is good, wiring is intact, layout is standard, no open circuit or short circuit.
The standards for maintenance of agricultural implements (plow, pickaxe, and sowing): To achieve correct installation and adjustment; No deformation; Fasteners should be fixed firmly; Reliable lubrication, no dry friction; Parts are complete, and the technology is in good condition.
Second, the operating standards. Should be a professional, two accurate, three slow, four ban. One specialization is to concentrate on homework. When working in the field, it is necessary to walk straight and straight, and adjust and adjust the farming tools timely and accurately. Two standards, that is, all kinds of meter readings are correct, hands and feet with the correct movement; three slow, refers to the start of trailers hanging farm tools to start slowly, downhill, detours to slow, over the villages and towns, bridges to slow; four ban, means prohibit long In overload operations, it is forbidden to tow agricultural implements at high speeds, prohibiting dismantling, disassembling, and disorderly adjustments, and prohibiting persons who have not been specially trained or unqualified from taking posts.
Third, the storage standards. Agricultural machinery should have a special warehouse or a dedicated parking lot. For a longer period of time, it should be kept by special personnel. The parking place should be free of weeds and stagnant water. The storage should be clean, flush, coated, cushioned, full, ie, clean inside and outside, and free from oil pollution. Machines are parked neatly; working parts should be coated with waste oil, and racks should be painted or painted to prevent machine tools from being corroded; implements should be supported to make them clear of the ground; parts are intact and not deformed, and long-term parked valuable components. Should be removed for storage.
In addition, diesel should be implemented three filters, two precipitation, once sealed, that is, diesel oil from the tanker into the tank to filter, from the oil into the oil tank to filter, from the oil tank to the tank to filter; tank precipitation In 96 hours, the oil drums are settled for 48 hours; the locomotive should be sealed and refueled.