First, the belt filter press common troubleshooting
1. Supporting bearing failure at both ends of the tensioning roller, it is necessary to strengthen the bearing inspection and maintenance during operation;
2, the upper and lower rollers are not synchronized, easy to appear in the tension cylinder failure, synchronous gear wear (especially the use of plastic material synchronous gear), need to strengthen the synchronization gear, tension cylinder and its attached pneumatic pipe inspection
3, the tension bar offset, mainly occurs when the tension bar bushing is excessively worn or detached, it is necessary to regularly check the bushing wear degree, and arrange maintenance and replacement in time;
4. Roller surface accuracy problem. The accuracy of roundness and coaxiality of the tensioning roller should be checked before installation. The tolerance value is the same as above.
Second, the conclusion
There are many variables that affect the effect of the belt filter press, and the causes of equipment failure are also complicated. It may be the result of a fault that may be the result of multiple faults. In the operation management, the belt filter press is found. In case of failure, the current operation status of the belt filter press and the management data should be checked from easy to difficult to prevent the fault from further expanding. The above article is for reference only.
Hospital Bed,Adjustable Bed,Medical Bed
Pukang Medical Instruments Co., Ltd. , http://www.xs-medicalbeds.com