I. Construction of turtle turtle polyculture pool The turtle polyculture pool ranges from 25 to 200 square meters. The walls of the pool are made of masonry walls and cemented surfaces. There should be no rat or snake caves around. The pool depth is 1.3 meters to 1.5 meters and the water depth is 0.7 meters to 1.0 meters. The drainage channels can be covered with prefabricated panels or other hard sheets. In the pool pool around earthen ponds, an anti-escape wall with a height of about 0.5m to 0.7m is built. The top of the wall has a "T" type to prevent fleeing, and the width is 10cm to 12cm. All the walls are plastered with cement and the corners of the walls should be curved.
Shelling tables, feeding stations, and inhabiting land are indispensable facilities for turtle ponds. The feeding station is located above the outlet, and the bait that sinks into the water can drain out of the pool quickly. In order to save the water surface, drying shell and feeding table can be used together. In addition, put some more planks in the pool as a habitat for turtles and badgers.
The courtyard plastic greenhouse is covered with a plastic film and its shape is mostly arched. From the perspective of raising the temperature and keeping warmth of the turtles in the courtyard, greenhouses are less effective than greenhouses, and their service life is short. However, the economic benefits of greenhouses are more appropriate for rural farmers. The skeleton of the greenhouse can be constructed of wood, bamboo or cement.
The heating equipment of the courtyard type turtle polyculture pool is usually a small-sized atmospheric pressure water heating boiler. A heated circulation pipe is installed in the pool to allow the warm water to circulate in the pipe, and the water temperature can be maintained at 24°C to 30°C.
Second, the turtle carp into the pool Turtle carp before entering the pool to be disinfected, the commonly used disinfection items are lime and bleach. Quicklime: If draining pool water, use 50kg to 75kg per mu; if you keep the water depth of 1 meter, use 125kg to 150kg per mu. Bleach: 1 meter deep water per mu, with 13 kg to 13.5 kg. When it is used, it must be strictly spilled on the land and completely disinfected. After about 10 days, when the toxicity disappears, it can be stocked.
Third, the stocking density of juvenile tortoise 40/m2 to 50/m2 is more appropriate; 2 instar turtles 30/m2 to 40/m2; 3rd instar turtles 20/m2 to 30/m2 ; Juveniles 40/m2; Cubs 30/m2. Because the polyculture pond contains a large amount of metabolites from turtles, on the other hand, there is inevitably a residual bait deposit. This makes the water quality become fat and can breed abundant plankton. Therefore, when the turtle roach is polycultured, It is advisable to use fertilized fish, and the input density is preferably 45% of a single fish.
Sorfa serological pipettes are
designed to be used with electromotion pipette controllers and manual
pipette pump to transfer liquid in various volume for laboratory use.
With high transparency polystyrene and clear graduation, the serological pipettes are
easy to be read in accurate volume by users. Graduation is printed on
pipette surface with the accuracy of ± 2%. To meet global market need,
Pipette Tips are crafted to two forms, welding and stretching.
Serological Pipettes vary from 1ml, 2 ml, 5ml, 10ml, 15ml to 25 ml, 50
ml and 100ml. Seven types of color code on tips make pipettes easily
recognizable in different volume. Preferably, each pipette contains a
filter plug which is better than cotton plug in its bore to prevent
passage of particulates. Sorfa has the ability to produce all current serological pipettes including welding pipette, stretching pipette, Aspirating Pipette, short pipette, with-tip pipette and colorized pipette.
Two types of packaging are available for pipettes: buck packaging and
individually packaging in plastic/paper wrapper. All Sorfa serological pipettes are packaged in bags with sterilization bags, RNase-free, DNase-free and Non-pyrogenic.
Serological Pipettes
Serological Pipettes,Mini Serological Pipette,Welding Serological Pipette
Zhejiang Sorfa Medical Plastic Co., Ltd. (Ningbo Jiangdong Aron Imp&Exp. Co.LTD) , http://www.sorfapipettes.com